VMware ESXi 6.5 lsi-mr3 7.701.14.00-1OEM SAS Driver for Avago Megaraid Based Adapters Avago Technologies lsi_mr3 driver which enables support for MegaRAID SAS products based onthe 3516,2508,3504,3408,3404 SAS ROC family. Download: VMware ESXi 5.0 Driver for LSI MegaRAID SAS Controller Description The ESXi 5.0 driver includes LSI MegaRAID SAS driver version 5.34. The LSI MegaRAID driver (megaraid_sas) supports products based on the 2108 and 2208 SAS ROC family.
The LSI Mega Raid Storage Manager is a program where you can monitor the health of your array, setup drives and change notification details. IBM has always provided a way for you to manage your array in Windows, Linux, Unix and many other operating systems. Currently configuring the LSI Mega Raid Storage Manager on VMware ESXi 5.1 is not very well documented by IBM. IBM has a retain tip with installation instructions but that tip is outdated. Following these steps below will get the LSI Mega Raid Manager running on an IBM ServeRAID adapter.
Please note this guide should work the same for any non IBM server that is running VMware ESXi 5.1 and a LSI Mega Raid Controller. Tested Configuration and Hardware: Operating System: VMware ESXi Version: 5.1 IBM ServeRAID M5110 IBM xSeries 3650 M4 Server Step 1: Download the latest LSI SMIS for VMware Step 2: Enable SSH on VMware From the VMware host console press F2 then go into troubleshooting. Step 3: Extract the LSI download and upload the VIB file to /tmp 'LSIbootbanklsiprovider 500.04.V0. 38-0006.vi b' Step 4: Install the VIB 1.
Cd /usr/bin 2. Esxcli software vib install -v /tmp/LSIbootbanklsiprovider500.04.V0.38-0006.vib -no-sig-check Step 5: Reboot the VMware server Step 6: Download and install LSI MegaRaid Manager. The download is on the same URL from step 2 or you can also download this from IBM. Step 7: Add the VMware hostname to your DNS server. Setup an A record to point your VMware hostname to it's IP address. Step 8: Install LSI Manager Perform a basic install, no password is needed during the install. Step 9: Configure LSI Manager Login using the VMware server login details.
Note: IBM released retain tip but the steps currently does not work with ESXi 5.1 Conclusion: Once you have followed these steps you will have full control over your IBM ServeRAID using LSI Mega Raid Controller on a VMware ESXi 5.1 operating system. You will be able to monitor the array from any Windows computer in your network. I have found that this method DOES work for ESXi 5.5 with one exception: In order for the LSI MegaRAID Manager to be able to discover the VMware Host it is necessary to disable the ESXi Firewall which could pose a security risk for your VMware Infrastructure and I would recommend that after the inspection of your LSI configuration you re-enable the ESXi Firewall. The command to enable and disable the ESXi Firewall are as follows: Disable the Firewall # esxcli network firewall -enabled false Enable the Firewall # esxcli network firewall -enabled true Check the Firewall Status # esxcli network firewall get Default Action: DROP Enabled: true Loaded: true.